Signature Series Shotgun Case

4.94 out of 5
(34 customer reviews)


  • Waxed canvas shell
  • Quilted flannel lining with batting
  • Brass hardware
  • #10 brass zipper
  • Lockable, double zipper pulls
  • Harness leather handle/sling/trim
  • Accessory pocket (10″x4.5″) with elastic loops for choke tubes
  • Stock side of case is 6″ tall
  • Barrel side of case is 3.5″ tall
  • Limited Lifetime warranty

Residents of California-Proposition 65 WARNING


A true icon of a 120-year-old brand known for legendary gun case craftsmanship.  Boyt’s Signature Series firearm cases set the standard by which all other cases are measured.  Constructed of a heavy waxed canvas shell and designed to repel moisture equally well as a barbed-wire fence.  Breathable, thick cotton batting lined with a plush flannel lining beds your firearm like a new born child.  Reinforced stitching abounds in all the right places.   Brass zippers and harness leather trim provide a class and style that will make you proud to hand this case down to the next generation.

Additional information


44", 46", 48", 50", 52", 54"


OD Green, Khaki

34 reviews for Signature Series Shotgun Case

  1. 5 out of 5

    James Winterboer (verified owner)

  2. 5 out of 5

    Anonymous (verified owner)

  3. 5 out of 5

    David Sjostrom (verified owner)

    Beautiful gun case. Outstanding workmanship and quality. And, the only one I can recall seeing available in 54″ length!

  4. 5 out of 5

    James M. (verified owner)

    Bring production back home.

  5. 5 out of 5

    Campbell (verified owner)

    Well made, nicely finished. Quality consistent with past purchases of Boyt shooting accessories.

  6. 5 out of 5

    Russell H. (verified owner)

  7. 5 out of 5

    Carl Weiss (verified owner)

    It’s great like the big side pocket.

  8. 5 out of 5

    Angel Abreu (verified owner)

    High quality product!

  9. 5 out of 5

    Jay Reed (verified owner)

    The quality and style is exactly what I was looking for!

  10. 5 out of 5

    Anonymous (verified owner)

    Great product great service fast delivery very pleased

  11. 5 out of 5

    Elisha Lee (verified owner)

    Really good quality – very pleased with this case.

  12. 5 out of 5

    Kurt (verified owner)

  13. 4 out of 5

    Anonymous (verified owner)

    Just as expected. Would of liked the zipper to go from one end to the other to make it easier to put my gun in. It is hard to get the gun all the way up inside as it is.

  14. 5 out of 5

    Paul B. (verified owner)

    Targeted made in USA ! Went to your plant in Iowa Falls years ago. I will never wear this out!

  15. 5 out of 5

    Larry Cohen (verified owner)

  16. 5 out of 5

    Robert B. (verified owner)

    My dad has been buying these cases for years and after he got me two for my birthday years ago they have been my go to case for all my rifles and shotguns. Absolutely worth the money and won’t fail if a little dirt, water, or wear. My dads cases are well over 25 years old and still going great.

  17. 5 out of 5

    Hal (verified owner)

  18. 5 out of 5

    Bobby Durrance (verified owner)

  19. 5 out of 5

    Bobby Durrance (verified owner)

    Great and well made products

  20. 5 out of 5

    CHARLES J V. (verified owner)

    Have several Boyt cases , some 40 yrs old. Got this one for my grandson’s BPS. Expect he will still be using them when he is my age. Nothing but the best !!

  21. 5 out of 5

    Parker B. (verified owner)

    My daighter loves her new ahotgun sleeve. Its well made and fits her gun perfectly. The product arrived quickly with no damage. I would definitely buy this product again.

  22. 5 out of 5

    Bobby Durrance (verified owner)

    Your harness is awesome… love it thank you For making a great product!! I will be ordering another one soon

  23. 5 out of 5

    Fred Mackaman (verified owner)

    Boyt is the very best! All of my rifle and shotgun cases are Boyt.

  24. 5 out of 5

    Jimmie PRINCE (verified owner)

    Good quality and fast shipping

  25. 5 out of 5

    Jeffrey W. (verified owner)

    I’m very pleased with the quality of the soft shotgun case. High quality materials and well made. The 52” size is not quite long enough for my Bennelli supersport which is exactly 52” long. I’ll use this for a different gun and plan on buying the 54” when it’s available.

  26. 5 out of 5

    Eric Dean (verified owner)

    Great quality and feel to this case. Top notch zipper and leather work!

  27. 5 out of 5

    Andrew Tracey (verified owner)

    Excellent Quality and Value

  28. 5 out of 5

    Richard Smith (verified owner)

    Unfortunately I will need to return for a longer case. Otherwise all good.

  29. 5 out of 5

    Robert D. (verified owner)

    52 Inch just fit my Winchester 101 with 30″ barrel w/chokes. High quality–should last for grandsons.

  30. 5 out of 5

    Russ Hardy (verified owner)

    Great experience, just like the last time I bought from you.

  31. 4 out of 5

    johnnye estes (verified owner)

  32. 5 out of 5

    FRANK (verified owner)

    I already own two other Boyt shotgun cases. They are very well made and have survived mud and muck in my duck blinds. Perfect protection for my expensive waterfowling shotguns. This new Boyt replaces a cheaper brand that prematurely split its seams.

  33. 5 out of 5

    LARRY R CATT (verified owner)

    I have many Boyt products including 10 Signature Series Shotgun Cases. I had an old one with a broken zipper and mailed it to Boyt. Boyt put a new zipper on it and mailed it back to me, it looks and works like new again.

  34. 5 out of 5

    Scott Huyvaert

    I have this case in 52 and 54 inch. I wouldn’t trust my firearms with any other brand. Boyts quality and durability are unmatched. The quilted interior not only protects but doesn’t tear like most brands in the soft case category.

Add a review

Your email address will not be published. Required fields are marked *

Q: Are these cases made in the USA?
— Asked by Tommy Braswell on September 29, 2019
A: Tommy, These cases are made overseas. Thanks, Lori
— http://Customer%20Service
Q: I am in need of a leather 1" replacement strap on my 40 y r old Boyt Shotgun case. The old strap is leather and approx 36 " long and tan in finish. Do you have straps available, at what cost, and how do I order? Thankyou.
— Asked by David Conley on August 1, 2020
A: David, We do offer replacement straps through customer service. They are a slightly different color than the original and the cost is $15.00 plus $10.00 shipping. Call customer service at 1-800-550-2698 to place an order. Thanks, Lori
— http://Customer%20Service
Q: In response to Briana, I was needing this case for a Model 1873 lever action rifle, which is 38" long. I already have this case in the 44" model for a shotgun I have, and the lever action fits perfect aside from the length.
— Asked by Connor on February 21, 2018
A: Hi Connor, Thank you for letting me know which model of firearm. I will pass this along to our R & D department. If you have any further questions please let us know. Thank you, Briana
Q: I purchased this case from a local dealer, wanted to know how to register it.
— Asked by myracs on November 30, 2017
A: Hello, I have sent you a direct email for further instruction. Thank you, -Briana
Q: 46.75 inch Browning BPS. Will the 48" work or would you suggest the 50". I prefer a snug fit but do not want the zippers marring the ends of the gun.
— Asked by Steve on August 26, 2020
A: Steve, You should be ok with the 48". We normally suggest going 2" longer but 1" has shown to be ok unless the gun has an odd fit. Thank you, Lori
— http://Customer%20Service
Q: Sure wish you would offer this in a 40-inch model for us lever action folks (38-inch long rifles). Don't want to have to buy a 44-inch case and have 6 inches of extra case flopping around at the barrel end.
— Asked by James on September 19, 2020
A: James, The Alaskan Series case does come in a 40" length. It is the same case as the signature series but without the leather sling and spine. Thanks, Lori
— http://Customer%20Service
Q: Based upon the answer to one of the previous FAQs, I'm guessing that the bag length should be at least 2" longer than the overall length of the gun. Is that correct? Also, when do you expect to get the khaki cases back in stock for SKU: 0GCWC4406? Thanks!
— Asked by Steve on February 14, 2018
A: Hi Steve, Yes you want the case to be 2" longer than the overall length of the firearm to ensure a proper fit. It looks like they will be back on stock around 3/1/2018. If you have any further questions please let me know. Thank you, Briana
Q: My gun has a overall length of 48” what is the correct length of case should I buy?
— Asked by Mark Lindholm on November 26, 2017
A: We recommend the 50" or more.
— http://Jennifer%20Watson
Q: Is this made in America?
— Asked by William Fissel on February 19, 2019
A: William, These cases are not made in America. They are made in China. Thank you Lori
— http://Customer%20Service
Q: Is there anyway to get this case in a 40" version? I know the Alaskan series comes in a 40" version but the Signature series is much higher quality.
— Asked by Connor on February 19, 2018
A: Hi Connor, Unfortunately we do not make the Signature Series in a 40". What type of firearm are you needing this case for? I will pass this information along to our R & D Department. Thank you, Briana

Have a Question? Submit it here!