Boyt Harness Company Signature Series Takedown Canvas Case

4.53 out of 5
(19 customer reviews)


  • Waxed canvas shell
  • Quilted flannel lining with batting
  • Designed for side-by-side, over/under or pump/auto
  • Leather tip, sling and handle
  • Solid brass hardware
  • Padded divider
  • Overall height: tallest point 11″ shortest point 8.5″
  • Brass zipper
  • Top pocket: (Barrel) 4″
  • Bottom pocket: (stock) 5″
  • 10″ x 6″ exterior pocket
  • Limited Lifetime warranty

Residents of California-Proposition 65 WARNING

Additional information


28", 30", 34"


OD Green, Khaki

19 reviews for Boyt Harness Company Signature Series Takedown Canvas Case

  1. 5 out of 5

    Ronald L. (verified owner)

    Actually, my third breakdown case from Boyt, purchased because they are great at protecting my expensive taste in over and unders.

  2. 5 out of 5

    Richard (verified owner)

    I have a number of Boyt products. Quality is consistently top notch.

  3. 5 out of 5

    Samuel M. (verified owner)

    This is my second Boyt purchase. I’m very pleased with quality, craftsmanship, and look of the products I’ve purchased from Boyt.

  4. 5 out of 5

    John Cook (verified owner)

    Great product, well made light but sturdy.

  5. 5 out of 5

    dick weart (verified owner)

    The case is beautiful and perfect for my double barrel 20 guage. The old LeFever gets a new home!

  6. 5 out of 5

    Michael P. (verified owner)

    Very nice case for my over under. I ordered the 30 inch case for my gun with 28 inch barrels it is a perfect fit. I own several boyt cases and bags they never disappoint! Good quality products every time!

  7. 5 out of 5

    B Gordin McMurtry (verified owner)

    Great product, high quality and quick shipping.

  8. 5 out of 5

    john Ballance (verified owner)

    The product is great the service was even better.

  9. 5 out of 5

    Scott P. (verified owner)

    The takedown case is very well made. Durable on the outside, nicely padded and has a soft interior to further protect my shotgun. Highly recommended.

  10. 5 out of 5

    Bruce Anderson (verified owner)

    Excellent craftsmanship! The zipper looks like it will last a lifetime and leather trim is carefully sewn. I got the 30” case for my Browning 725 with a 30” barrel and extended chokes. I was concerned that with the with extended chokes, the barrels wouldn’t fit with the chokes in but they do. Very well made case that fits nicely over my shoulder.

  11. 4 out of 5

    Richard (verified owner)

    Case is great as always. The rawhide loop at the top of the case had a tear and broke the first time I tried to hang it by the loop.

  12. 5 out of 5

    Dwayne (verified owner)

  13. 5 out of 5

    Vincent DiBella (verified owner)

    Thanks for your gun case. It looks beautiful and has that “old school” look and feel to it. As an “old school “ former Marine, I can appreciate what works and what doesn’t. Your gun case will make me look good at the trap range, even though my shooting doesn’t.

  14. 5 out of 5


    Outstanding soft case. I bought the longer take down case easily holds a 32″ clays gun o/u, pump or auto.
    I bought mine in 1995. I use it alot it lays on the clays car along with the Boyt range bag. My zippers all work fine.I emailed these guys last year looking for a new shoulder strap for my range bag. I told them it was not a warranty issue as I was using the strap as a temp leash for a dog and the 24 year old strap broke. They did not respond they simply sent a new strap in two days!!!! I recommend getting the range bag to match the gun case. Mine are faded and look better than they did new. Good Company

    • Erica Puk (store manager)

      We so happy you enjoy your case Jim! Our company is always happy help our customers with getting the best use out of our products and want them to last for you!
      Thanks for your comment!

  15. 5 out of 5


    Fits my 30″ beretta overunder perfectly.

  16. 5 out of 5


    Lovely case, no idea what the strap is supposed to be used for since I can’t get it out of the center eye.

    • Customer Service (store manager)

      The strap is designed to be extended and used as a shoulder strap or a carrying handle. Once the strap is extended then it will slide over the shoulder. It has the same concept as our signature series and alaskan series gun cases.
      Thanks for your comment

  17. 1 out of 5

    Jim Davis

    Liked the well made case, but zipper broke after 6 uses.

    • Briana Thompson

      We are happy to hear that you liked the case. Please contact customer service to discuss how the zipper broke at 641.342.6773.
      Thank you,

  18. 5 out of 5


    Sturdy construction, plush durable interior, rugged exterior, great looking and as small as possible for compact transport.

  19. 1 out of 5

    Douglas Humble

    The case was excellent but the zipper broke within thfirst two weeks I had it and it has since been useless.

    • Briana Thompson

      We are so sorry to hear that the zipper broke on your case. Please contact Customer Service at 641.342.6773 and they will be able to assist you further.
      Thank you,

Add a review

Your email address will not be published. Required fields are marked *

Q: I have a canvas take down case the strap/sling has become stretched at adjusting holes and is ready to break. How can I get a replacement strap/sling?
— Asked by John M Parypinski on November 25, 2018
A: John, I have sent you an email with instructions. Calling customer service is also another way to get replacement slings.
— http://Customer%20Service
Q: I have a Ruger Red Label over and under with 26" barrels. What length take down case would fit for this gun?
— Asked by Ron Prchal on November 13, 2018
A: Ron, We usually recommend to add 2" to the length of the barrel for a good fit when looking for a case. I would recommend the 28" for you
— http://Customer%20Service
Q: Will this case work for a Browning SA - 22 rifle without scope? If so, the 28 or 30 inch? Thanks
— Asked by Louis Minsky on July 11, 2020
A: Louis, You will need to measure your barrel to see what case you are needing. We go by measurements as our cases are not made gun specific. Thanks, Lori
— http://Customer%20Service
Q: Where is your Signature Series Takedown Canvas Case made? Many thanks
— Asked by Jim Augeri on November 30, 2020
A: Jim, These cases are made overseas. Thanks, Lori
— http://Customer%20Service
Q: Has the broken zippers issue been resolved ?
— Asked by Jack Winover on March 17, 2019
A: Jack, This was not an ongoing issue to be fixed. Those were some isolated incidents so there should be no problem. Thanks Lori
— http://Customer%20Service
Q: Will this case work for a Browning SA - 22 rifle without scope? If so, the 28 or 30 inch? Thanks
— Asked by Louis Minsky on July 12, 2020

This question has not been responded to yet.

Q: Will a Beretta 686 with 30" barrels fit in the 30" Signature Series Takedown Canvas Case?
— Asked by Steve on September 1, 2018

This question has not been responded to yet.

Q: What is the total overall length and width of both take down canvas cases?
— Asked by Sal on June 8, 2018
A: Hi Sal, The overall length of these cases will depend on what length you order for your gun. As for the width, you are looking at the tallest point being 11" and the shortest point being 8.5" of the takedown case above. For the two barrel case you are looking at 14" and 11.5" for the tallest and shortest points of that case
— http://Customer%20Service
Q: What is the over all length of both canvas take down cases
— Asked by Sal on June 8, 2018

This question has not been responded to yet.

Q: Will a 34” barrel fit into ether of the takedown soft cases?
— Asked by Sal on June 12, 2018

This question has not been responded to yet.

Q: Will the 34" hold my BT99 34" barrel?
— Asked by Harry on December 16, 2017
A: We recommend adding 2" to the overall length of your gun or 20” to the length of the barrel when choosing the perfect size case.
Q: Which size Boyt Harness Signature Series Takedown Canvas Case do you recommend for an OU with 28" barrels and a SxS with 28" barrels? Thanks you!
— Asked by Joseph Giovannini on November 20, 2017
A: We would recommend going with the 30" case.
— http://Jennifer%20Watson
Q: Will the 30" OSC214M9 work for a 30" barrel? The 34" is longer than I want.
— Asked by gary fleming on November 23, 2017
A: Yes, the 30" will work.
— http://Jennifer%20Watson
Q: what is the overall length of the 28" takedown case?
— Asked by chris on May 15, 2020
A: Chris, The exterior length of the 28" case would be 31". Thanks, Lori
— http://Customer%20Service
Q: Are the take down cases washable?
— Asked by Scott Racine on March 10, 2018
A: Hi Scott, This can be hand washed with a damp cloth and mild detergent such as Dawn dish soap, then hang to dry. If you have any further questions please let us know. Thank you, Briana
Q: Is the internal barrel sleeve removable or collapsible ? The case is the perfect size for an AR pistol.
— Asked by Jerry Grence on February 27, 2018

This question has not been responded to yet.

Q: Are there any pictures and descriptions, pocket sizes, etc. of the inside of the bag?
— Asked by Gregg on February 15, 2020
A: Greg, The measurements of the pockets and a description of the inside is above in the details. I
— http://Customer%20Service
Q: I have purchased a Beretta onyx pro with 28” barrels o/u 28 ga. But have now added an opinionated 410ga. Barrel set. Will this breakdown case hold both barrel sets in the 30”?
— Asked by David Clymer on January 2, 2019
A: David, I do not see any reason why the 30" case will not work for your 28" barrels,. Thanks Lori
— http://Customer%20Service
Q: Will 28 inch fit my cz ringneck with 28 inch barrels ? I want the smallest case practical.
— Asked by William Crook on June 27, 2021
A: William, You are going to want at least a 30" case. We recommend adding 2" to allow for variances. Thanks, Lori
— http://BoytSales
Q: Is it lockable via double sipper pulls?
— Asked by Robt. on May 21, 2018
A: Hello, this case is a single zipper pull, so it is not lockable.
— http://Jennifer%20Watson
Q: Which case is best for a Browning Citori 725 Field O/U with 28 inch barrels?
— Asked by Richard on September 14, 2018
A: Hi Richard, This case will fit your gun. I would recommend the 30" for the best fit
— http://Customer%20Service

Have a Question? Submit it here!